Why thumbs up for the UHP graphite electrode?

The ultra-high power graphite electrode is abbreviated as the UHP graphite electrode.

● Large bulk density, low internal defects, low resistivity;

● High bending strength, not easy to be broken;

● The graphitization temperature is high and the resistivity is low.

550mm UHP Graphite Electrode

Surface Quality of UHP Graphite Electrode

1. There should be less than two defects or holes on the electrode surface, the max size of which is mentioned in the below chart.

2. There should be no transverse crack on the electrode surface. For the longitudinal crack, the length should be less than 5% of the electrode circumference and the width between 0.3-1.0mm.

Technical Properties of UHP graphite electrodes

Our UHP graphite electrode has increased the amount of small-grain raw materials and powders in the raw materials, and the UHP graphite electrode increases the number of impregnations, so its bulk density is higher than normal.

In the production process of the UHP graphite electrode products, the particle size of coke is reduced, the strength of carbonaceous raw materials is increased, and the bending strength is correspondingly improved.

Our UHP graphite electrode has low resistivity and good conductivity and low motor consumption during use.

For more information about UHP graphite electrode, feel free to contact us.